Opryskiwacze DAMMANN
German manufacturer of field sprayers since 1979. Trailed from 4,400 to 20,000 l, self-propelled DAMMANN-trac with hydrostatic drive, booms up to 48 m.
One speciality since 1979: applying liquid evenly, across every field
German manufacturer of field sprayers since 1979. Trailed from 4,400 to 20,000 l, self-propelled DAMMANN-trac with hydrostatic drive, booms up to 48 m.
Herbert Dammann GmbH has been building one thing since 1979: machines for precise dosing of liquids in the field. The range is unusually broad for this specialisation — from the trailed Classic with a 4,400 l tank to the three-axle Profi-Class Tridem with 20,000 l and a 48 m boom, alongside its own self-propelled DAMMANN-trac machines with hydrostatic drive and wheel motors. The common denominator of the whole range is the boom: pneumatic pitch compensation keeps the height above the crop where the field is not flat, and section control via ISOBUS keeps the rate correct at headlands and wedges. The brand is well known in Poland and has its users; RUTHENIA ALBA is an authorised DAMMANN distributor and adds to it machine selection for specific fields, parts, service and financing from one place.
Maximum boom width
Tank — Profi-Class Tridem
Manufactured in Germany since
Four classes of machinery
One specialisation, four different designs
Trailed sprayers: Classic, Profi-Class, Tandem, Tridem
Four levels in one line: Classic (4,400–6,000 l, 18–39 m) as an entry into the professional class, Profi-Class (5,000–7,000 l, 24–39 m) with broader standard equipment, the two-axle Tandem (8,000–14,000 l, 30–48 m, up to 50 km/h), and the three-axle Tridem with 20,000 l and a boom up to 48 m.
Self-propelled DAMMANN-trac: DT 2400H, DT 2800H, DT 3500H
Own chassis, hydrostatic drive with motors in the wheels, ground clearance up to 110 cm. DT 2400H S5 Highlander (4,400–5,000 l) with track and clearance adjustable from the cab; DT 2800H (5,000–7,000 l, 285 hp) and DT 3500H (8,000–12,000 l, 313 hp, six wheel motors) for the largest areas.
Mounted units on a carrier: Unimog, JCB Fastrac, MB-trac
A complete Profi-Class sprayer mounted on a carrier you already own: tank 2,000–4,000 l, boom 15–36 m, 5–18 sections, ISOBUS as standard. A solution for farms and contractors who already have the platform and want to use it for crop protection too.
GREEN: golf courses, sports grounds, green spaces
Profi-Class-GREEN: tank 500–2,000 l, boom up to 12 m, pump 120–250 l/min and rate control via D-GPS. Mounted, semi-mounted or trailed versions, chosen for the site, not for the hectares.
Nine models is too many to choose from photos
There are fifteen thousand litres between the Classic and the Tridem, and between a trailed and a self-propelled machine — the whole way the farm organises its work. The selection guides you through six questions about your fields and ends with a recommended model, with the reasoning and with a limitation, if one exists.
- 01Zastosowanie
- 02Area
- 03Tractor
- 04Pole
- 05Belka
- 06Priorytet
What stands behind DAMMANN machines
The boom holds its height, because the suspension works independently
With a 40–48 m boom, every centimetre of deviation at the end of a wing changes the rate applied beneath it. On DAMMANN machines the boom has pneumatic tilt compensation: the system separates the frame's movement from the boom's movement, so the machine rocking in the tramlines does not transfer to the wings. This is not an extra on the equipment list: without it, a wide boom on uneven ground sprays too high at times (drift) and too low at others (streaks).
Hydrostatic drive instead of drive axles
Self-propelled DAMMANN-trac machines have no mechanical gearbox or axles: each wheel is driven by its own hydraulic motor (four in the DT 2400H and DT 2800H, six in the DT 3500H). There are no differentials that, in the field, divert torque away from a wheel with weaker traction, and no shafts carrying drive from front to rear. Speed is adjusted steadily from creep up to 40 km/h, and the machine's weight is spread across more contact points.
Wheel track and ground clearance adjusted from the cab
The DT 2400H S5 Highlander lets you change wheel track and ground clearance without leaving the cab and without tools, including during work. This answers a farm where rapeseed, maize and cereals have different tramlines and crop heights: one machine works everywhere, instead of a compromise between crops. Ground clearance up to 110 cm opens up late applications, carried out when they are needed rather than when the machine can still fit.
Rate under control: sections, maps and ISOBUS as standard
The ISOBUS terminal is standard equipment across the whole range, not an option to add on. Up to 18 independently controlled sections means that at the headland and on turns, what has actually gone beyond the area is switched off, without overlaps and without skipped strips. The machine accepts application maps and reports completed work to the tractor terminal, so the operation is documented, not just carried out.
- 01Four machine classes from one design: trailed, self-propelled DAMMANN-trac, body-mounted units on carriers and GREEN — the same liquid system and the same boom
- 02Tanks from 4,400 to 20,000 l and booms from 15 to 48 m — one brand serves both 500 and 15,000 ha in a season
- 03DAMMANN-trac: hydrostatic drive with wheel motors, no mechanical axles or differential gears — all-wheel drive without interruption in torque transmission
- 04DT 2400H Highlander with wheel track and ground clearance adjustable from the cab while driving — access into tall crops and onto fields with lower bearing capacity
- 05ISOBUS as standard, up to 18 sections and pneumatic boom pitch compensation — the rate holds also at headlands and wedges
Hedendorf near Buxtehude, Lower Saxony, Germany
The company was founded in 1979 and remains a family business to this day, with a plant in Hedendorf near Buxtehude (Lower Saxony). All production — tanks, frames, booms and assembly of self-propelled machines — takes place in Germany, and the range is built around one task: to apply liquid evenly onto the crop at variable speed and on uneven terrain. Hence three parallel designs instead of one: trailed machines for farms with a suitable tractor, self-propelled DAMMANN-trac where independence and access into tall crops matter, and body-mounted units on carriers (Unimog, JCB Fastrac, MB-trac) for those who already have a platform and want to use it. A separate line is the GREEN machines for golf courses, sports facilities and green areas.
DAMMANN models and solutions
Crop protectionClassic
Single-axle trailed sprayer — 4,400–6,000 l, boom 18–36 m
View model
Crop protectionProfi-Class
Single-axle trailed sprayer — 5,000–7,000 l, ISOBUS and pressurised circuit
View model
Crop protectionProfi-Class Tandem
Two-axle mounted sprayer — 8,000–14,000 l, boom up to 48 m
View model
Crop protectionProfi-Class Tridem
Three-axle trailed sprayer — 20,000 l, boom 40–48 m
View model
Crop protectionDT 2400H S5 Highlander
Self-propelled DAMMANN-trac — wheel track and ground clearance adjustable from the cab
View model
Crop protectionDT 2800H S5 EcoDrive
Self-propelled DAMMANN-trac: 5,000–7,000 l, ground clearance approx. 1,100 mm
View model
Crop protectionDT 3500H S5 EcoDrive
Self-propelled DAMMANN-trac: 8,000–12,000 l, three axles, six driven wheels
View model
Crop protectionProfi-Class on a carrier vehicle
Body for Unimog, JCB Fastrac or MB-trac — 2,000–4,000 l
View model
Crop protectionProfi-Class-GREEN
Turf and green areas: 500–2,000 l, boom up to 12 m, D-GPS rate control
View model
DAMMANN — maszyny w obiektywie
Conversation with an engineer.
The most common questions we hear from farms before purchase.
We have collected the questions we most often hear from farms before purchase — and the answers from our engineers. Every answer is based on verified knowledge of the machine.
- manufacturer's materials
- dokumentacji technicznej
- questions asked by farms
Answers based on the experience of thousands of farms in Europe.
The ISOBUS terminal is standard across the entire field range. The machine supports automatic section control (up to 18 sections, depending on the model and boom width) and work according to application maps. A compatible ISOBUS UT terminal in the tractor is sufficient; no second display in the cab is needed. The scope of functions depends on the machine configuration, and we confirm it at the quotation stage.
RUTHENIA ALBA is the authorised DAMMANN distributor in Poland. The brand is indeed not new here, and we do not pretend to be discovering it; nor are we the only place where it can be bought. The difference lies in what happens before and after the order. Before: we guide model selection from the fields rather than from the price list: area, field spread, soil bearing capacity, crop height, and whether the farm has a tractor ready to work with the sprayer throughout the season. After: parts, warranty and post-warranty service, and preparing the co-financing application are handled from one place, through the same channel as the rest of our machinery offer.
Not on the area alone. A trailed machine needs a tractor that is not needed anywhere else at the peak of spraying; if that same tractor is meant to be hauling or cultivating at the same time, the sprayer waits and the spraying window closes. The self-propelled DAMMANN-trac removes that dependency and adds two things a trailed unit does not offer: ground clearance up to 110 cm, and weight distributed across driven wheels, which matters on fields with weaker bearing capacity and for late applications. Our selection guide on the website works through these questions in exactly that order.
As a guide: Classic and Profi-Class work with tractors from about 150 hp, Tandem, depending on tank capacity and configuration, from about 200 hp, and the Tridem with 20,000 l requires a tractor and hitch matched to the full combination weight. Not only power decides: the permissible drawbar load, hydraulic capacity and braking system all matter. When you enquire, please give the tractor make and model; we check the combination before an offer is made.
Yes. As the authorised distributor, we order parts for DAMMANN machines directly from the manufacturer and handle them through the same channel as parts for the other brands in our range, using the manufacturer's catalogue numbers, not substitutes chosen “by eye”. Service requests are accepted through our after-sales form; the machine's serial number and year of manufacture are needed when reporting a fault.
Yes. We work with financial institutions serving agriculture in Poland, offering operating and finance leasing and investment loans, including in connection with grant schemes. We calculate options once the machine configuration is set; the financing section on this page describes the baseline scenarios.
Let us select a sprayer for your fields — not from the catalogue.
We will prepare an offer matched to the equipment and the needs of your farm.