DAMMANN Profi-Class-GREEN
Turf and green areas: 500–2,000 l, boom up to 12 m, D-GPS rate control
Precision where every mark stays in view
Maximum tank
Maximum boom
Rate control
Turf and green areas: 500–2,000 l, boom up to 12 m, D-GPS rate control
Turf does not forgive uneven dosing the way a cereal crop does: the mark of over-application is visible all season, and a missed strip is visible for even longer. Profi-Class-GREEN brings DAMMANN's liquid system to the scale of a site: a 500–2,000 l tank, boom up to 12 m, pump 120–250 l/min and rate control via D-GPS. The machine is available in mounted, semi-mounted and trailed versions, so it is matched to the carrier the site has, not to the hectares.
Profi-Class-GREEN — specyfikacja
Profi-Class-GREEN w polu
Golf courses
Greens, fairways and tees have different requirements and different sensitivity to over-application. Rate control via D-GPS and a narrow boom allow work within defined areas, not “by eye”, on surfaces that a player judges visually every day.
Sports grounds
Grass pitches are worked in narrow windows between matches. A machine with a 500–1,000 l tank and a boom of a few metres drives on and off faster than field equipment, and it leaves no ruts in the turf.
Parks and urban areas
Working among people and plantings requires a narrower boom and certainty that the liquid does not leave the treated area. A mounted version on a municipal vehicle can be more convenient here than a trailed set.
Explore the whole DAMMANN family
This model is part of the DAMMANN manufacturer's range. The other machines address the next stages of the same technology.
Crop protectionClassic
Single-axle trailed sprayer — 4,400–6,000 l, boom 18–36 m
View model
Crop protectionProfi-Class
Single-axle trailed sprayer — 5,000–7,000 l, ISOBUS and pressurised circuit
View model
Crop protectionProfi-Class Tandem
Two-axle mounted sprayer — 8,000–14,000 l, boom up to 48 m
View model
Crop protectionProfi-Class Tridem
Three-axle trailed sprayer — 20,000 l, boom 40–48 m
View model
Crop protectionDT 2400H S5 Highlander
Self-propelled DAMMANN-trac — wheel track and ground clearance adjustable from the cab
View model
Crop protectionDT 2800H S5 EcoDrive
Self-propelled DAMMANN-trac: 5,000–7,000 l, ground clearance approx. 1,100 mm
View model
Crop protectionDT 3500H S5 EcoDrive
Self-propelled DAMMANN-trac: 8,000–12,000 l, three axles, six driven wheels
View model
Crop protectionProfi-Class on a carrier vehicle
Body for Unimog, JCB Fastrac or MB-trac — 2,000–4,000 l
View modelCrop protectionYou are currently viewingProfi-Class-GREEN
Turf and green areas: 500–2,000 l, boom up to 12 m, D-GPS rate control
Aktualny modelProfi-Class-GREEN on each side
Conversation with an engineer.
The most common questions we hear from farms before purchase.
We have collected the questions we most often hear from farms before purchase — and the answers from our engineers. Every answer is based on verified knowledge of the machine.
- manufacturer's materials
- dokumentacji technicznej
- questions asked by farms
Answers based on the experience of thousands of farms in Europe.
Yes — across the full DAMMANN field range, the ISOBUS terminal is standard equipment, together with automatic section control. The number of sections depends on the model and boom width. In the tractor, a compatible ISOBUS UT terminal is sufficient.
In scale and dosing method. The boom up to 12 m and the tank from 500 l are matched to the site, not to hectares. D-GPS rate control matters where over-application leaves a mark visible all season. A field sprayer of similar capacity would be wider, heavier and harder to manoeuvre between plantings.
No. It is a separate line for turf and green areas. A boom up to 12 m and a tank up to 2,000 l make no sense on commercial fields. For arable crops we select machines from the mounted or self-propelled range. The “Sprayer selection” tool on this page separates these two paths with its first question.
We start from the fields, not the catalogue: seasonal area, spread and size of plots, soil bearing capacity, crops and crop height, and tractor availability at the peak of spraying. On this basis we determine the machine class, tank capacity and boom width, and only then the equipment. You can start the selection yourself — the “Sprayer selection” tool on this page guides you through the same questions, and the configurator assembles the machine item by item according to the manufacturer’s price list structure.
Yes. As an authorised distributor, we order parts for DAMMANN machines directly from the manufacturer, using DAMMANN catalogue numbers. Service requests are handled by our after-sales team — a service request requires the machine’s serial number and year of manufacture.
Precision where every mark stays in view
We will prepare an offer matched to the equipment and the needs of your farm.