DAMMANN Classic

Yes — across the full DAMMANN field range, the ISOBUS terminal is standard equipment, together with automatic section control. The number of sections depends on the model and boom width. In the tractor, a compatible ISOBUS UT terminal is sufficient.

What matters is not engine power but the drawbar and brakes. For the largest Tandem 14,000 l, the manufacturer states directly: lower hitch K80, drawbar load from 3,500 kg, D-value from 87.2 kN, braked trailer from 23,500 kg and tractor mass up to 16,000 kg. For the Tridem, respectively 4,000 kg, 102.4 kN and 34,000 kg. For smaller machines the requirements are lower, but we check them in the same way — when making an enquiry, please provide the tractor's make, model and drawbar equipment.

The inside of the system, not the tank. The Classic has mechanical valve control and single nozzle bodies. The Profi-Class is built like the mounted sprayers from DAMMANN: tandem nozzle bodies with electropneumatic shut-off, a pressurised circuit before the nozzles open, large filters with automatic flushing, and electropneumatic boom levelling. From the outside the two machines look similar — the difference shows only when changing rate and when working to maps.

In a conventional layout the liquid reaches the nozzles only once the section opens — the first metres of the pass go untreated, and when changing product the previous one remains in the lines. The pressurised circuit keeps the liquid circulating right up to the nozzles: the section opens instantly, and flushing the system is effective because there are no dead legs. On the Profi-Class, Tandem and Tridem it comes as standard equipment.

We start from the fields, not the catalogue: seasonal area, spread and size of plots, soil bearing capacity, crops and crop height, and tractor availability at the peak of spraying. On this basis we determine the machine class, tank capacity and boom width, and only then the equipment. You can start the selection yourself — the “Sprayer selection” tool on this page guides you through the same questions, and the configurator assembles the machine item by item according to the manufacturer’s price list structure.

Yes. As an authorised distributor, we order parts for DAMMANN machines directly from the manufacturer, using DAMMANN catalogue numbers. Service requests are handled by our after-sales team — a service request requires the machine’s serial number and year of manufacture.