Turnkey feed mills · Niemcy

Wagner Feedmill

We do not sell individual machines — we design and build complete feed mills according to what you produce. The machines are components of your line.

Feed mill capacity: 5–120t/hFeed mill capacity
Mielenie i mieszanie: 0,5–20t/hMielenie i mieszanie
Mixing accuracy: 1:100 000Mixing accuracy
Less energy — vertical vs horizontal mill: ~25%Less energy — vertical vs horizontal mill

Describe your project →See the process line

A project, not a catalogue

Wagner Feedmill & Silo Plants builds turnkey feed mills — from raw material intake through cleaning, transport, grinding, mixing and pelleting, to packing and process control.

Wagner Feedmill & Silo Plants GmbH from Lastrup (Germany) builds complete turnkey feed mills, designed around what you produce rather than individual machines. Four production types: industrial feed (poultry, pigs, cattle), petfood, fishfood/aquafeed and humus (pelleting of slurry and digestate into fertiliser, in cooperation with Witterra). The full process covers intake and cleaning of raw material, conveying (screw conveyors, redlers, bucket elevators), grinding, mixing, granulation with cooling, extrusion and packing, including process control. The mills operate in the range of 5–120 t/h; mixers and hammer mills 0.5–20 t/h. The highlight is the energy-efficient vertical mill, which according to the manufacturer uses on average 25% less energy than a horizontal mill.

Process line

One line — from raw material to finished feed

Each stage is a component we select for capacity, raw material and production focus. For petfood and fish feed, the line is extended with extrusion, drying and coating.

01ReceptionRaw material from field or silo
02CzyszczenieReiniger — impurity separation
03TransportScrew conveyors, redlers, bucket elevators
04RozdrabnianieVertical / hammer mill
05Dozowanie + mieszanieMieszalnik 1:100 000
06Pelleting + coolingPress + pellet cooler
07PakowanieBig bags, sacks, bulk

Production focus areas

We start with what you produce

Compound feed

A complete feed mill for poultry, pigs and cattle — from intake through to pelleting and packing.

Poultry · Pigs · Cattle

See focus area →

Petfood

Pet food extrusion lines: grinding, mixing, extrusion, drying, coating.

Extrusion · fat coating

See focus area →

Fishfood / aquafeed

Extrusion of floating and sinking pellets, drying and vacuum coating — for high fat content.

Floating / sinking pellets

See focus area →

Humus — granulated fertiliser

Pelleting of slurry and digestate into high-quality fertiliser (Wagner & Witterra): 20,000 m³/year → 3,500 t of granulate (92% DM).

Wagner & Witterra

See focus area →

Line components

Building blocks we assemble the plant from

What lowers the cost per tonne of feed: an energy-efficient vertical mill (~25% less energy), mixing with 1:100,000 accuracy, and extrusion for petfood, fish feed and full-fat soya. Each component is selected for capacity and focus — the same blocks recur on the focus area pages.

~25% mniej energii

Vertical / hammer mill

Grinding of raw material. According to the manufacturer, the vertical mill uses on average 25% less energy than a horizontal one and does not require separate aspiration (sizes 600/900/1250, 45–110 kW). The range also includes a hammer mill (22–355 kW) and a structural mill of 1.5–10 t/h.

accuracy 1:100,000

Horizontal mixer

Mixing with 1:100,000 accuracy — safe introduction of micro-additives (premixes, vitamins). Capacity 5–50 t/h, chamber 1,000–10,000 l, powder-coated or stainless steel 1.4301.

petfood · ryby · soja

Extruder

Extrusion of feed, pet food, fish feed pellets and full-fat soya — thermal-pressure processing that improves digestibility and durability.

Pellet press

Pressing the mixture into pellets and cooling. Closes the line after grinding and mixing; capacity 200 kg/h – ≥ 45 t/h, configuration according to the project.

Granule cooler

Cooling and final drying of granules after pressing — stable, durable pellets ready for packing.

Silos — intake, storage and drying

Intake, cleaning, drying and storage of raw material. Galvanised steel silos; capacities and layout designed for the facility (on request).

Projects

Wagner plants in focus

Real installations by the manufacturer. Detailed design references (location, capacity, scope) — on request.

Financing

A feed mill as an investment — leasing, loans, grants

A turnkey project can be financed through leasing or an investment loan, and part of the outlay can be covered by subsidies (KPO, PROW). We spread the cost over stages and help prepare the application.

Financing and grants (KPO)

Describe your project

Tell us what you want to produce (compound feed, petfood, fish feed, humus), what capacity you need, and whether it is a new plant, an extension or a mobile variant. We will come back with a line concept, scope and quotation.

Send a project enquiry →

No obligation · we reply within 24 h