Kivi-Pekka 6 — stone collector for the field
Kivi-Pekka · 6 m stone collector — for large areas and contract work

Kivi-Pekka 6

6 m stone collector — for large areas and contract work

6 m stone collector — for large areas and contract work

Kivi-Pekka 6

6 m stone collector — for large areas and contract work

The Kivi-Pekka 6 metre is a solution for large areas. High capacity, up to 1200 kg of stones per minute, and an impressive working width make the model well suited to contract work and demanding applications. It picks up stones with a diameter of 2.5–35 cm (and with the optional Flex Drum, up to Ø 50 cm) at a power requirement of 80 hp. Three-stage soil separation leaves the topsoil on the field, and hydraulic unloading up to 2.9 m allows direct loading into trailers and tippers.

Engineering

How Kivi-Pekka separates stones from soil

Kivi-Pekka harvesters rely on three-stage soil separation and the optional Flex Drum (standard on model 7).

01
How the mechanism works

Three-stage soil separation

The machine lifts the topsoil and separates stones from earth in three stages. (1) Stones pass onto a screen placed beneath the lifting drum; (2) they go into the hopper, while the sifted soil returns to the field; (3) the remaining soil is collected by a separate container behind the rear wall of the hopper and released at the moment of unloading. As a result, only stones end up in the hopper, and the valuable topsoil stays in the field.

Source: Kivi-Pekka Catalogue 2025 (English edition), p. 3 (“Soil collecting in three stages”)

02
Design decisions

Flex Drum — flexible drum for large stones

The lifting drum's drive runs along its frame, so the entire drum can move upwards. A hydraulic pressure accumulator allows the Flex Drum to “pass over” large stones instead of becoming blocked by them, while the suspension protects the screen and tines. The standard range of 2.5–35 cm extends to Ø 50 cm. The drum can also be raised from the cab to release a jammed stone, without leaving the tractor. The Flex Drum is available on models 5 and 6 (optional) and comes as standard on model 7.

Source: Kivi-Pekka Catalogue 2025 (English edition), p. 4 (“Flex Drum lifts heavy stones”, “Extra strong tines”)

03
Operation in practice

Tank capacity and discharge height

A larger tank means fewer stops for emptying. Model 5 has 3 m³ and a capacity of up to 1000 kg/min; model 7 has 5 m³ and up to 1400 kg/min. On models 4–7, the hydraulic discharge reaches 2.9 m, so stones go directly into a trailer with sides up to 2700 mm or into a lorry, without being unloaded onto the ground first.

Source: Kivi-Pekka Catalogue 2025 (English edition), p. 3 (“Tipping height ... up to 2.9 meters”)

04
Optional automation

ISOBUS package — ultrasonic sensor and rotor protection

The ISOBUS version measures the working depth with an ultrasonic sensor and maintains it automatically. In the event of a jam, the machine relieves the rotors by itself and raises the Flex Drum, then returns to work once the blockage clears. At the headland, a single button is enough: the automation lifts the machine and stops distribution. The package is available only in versions with the Flex Drum.

Source: Kivi-Pekka Catalogue 2025 (English edition), p. 4 (“Automation package with ISOBUS”)

05
Typical customer

Glacial soils

Farms on glacial soils, where stones “come up” out of the ground after every winter and damage seed drills, combines and tyres. Model 3.3 is for narrow specialist crops and landscape management (tractor from 60 hp), model 4 is an economical entry point (from 70 hp), model 5 suits medium-sized areas (from 80 hp), and model 7 is for large areas and contract services (from 100 hp).

Technical data

Kivi-Pekka 6 — specyfikacja

Working width
6 m
Stone diameter
Ø 2.5–35 cm (Flex Drum optional → Ø 50 cm)
Capacity
up to 1200 kg/min
Hopper capacity
3 m³
Weight
5400 kg
Discharge height
up to 290 cm (hydraulic)
Drum teeth
28 pieces
Tyres
560/60×22.5 (rotor tandem wheels 195×14)
Working speed
1–6 km/h
Power requirement
od 80 KM
Hydraulic flow rate
20 l/min
Soil separation
Three-stage — sifted soil returns to the field
Other models from the manufacturer

Explore the whole Kivi-Pekka family

This model is part of the Kivi-Pekka manufacturer's range. The other machines address the next stages of the same technology.

Gallery

Kivi-Pekka 6 on each side

Kadr 0101 / 03

Before you decide

Conversation with an engineer.

The most common questions we hear from farms before purchase.

We have collected the questions we most often hear from farms before purchase — and the answers from our engineers. Every answer is based on verified knowledge of the machine.

Based on
  • manufacturer's materials
  • dokumentacji technicznej
  • questions asked by farms

Answers based on the experience of thousands of farms in Europe.

An engineer answers

Model 6 has a 6 m working width and a capacity of up to 1,200 kg/min at 80 hp (Flex Drum as an option). Model 7 offers 7 m, up to 1,400 kg/min, a 5 m³ hopper, Flex Drum as standard (3.5–50 cm) and 100 hp. Model 7 weighs 6,540 kg, model 6 weighs 5,400 kg.

An engineer answers

As standard, Ø up to 35 cm. With the optional Flex Drum — up to Ø 50 cm; the drum has a hydraulic pressure accumulator and passes over large stones instead of getting blocked on them.

An engineer answers

3 m³ — according to the technical table in the EN 2025 brochure (previously unpublished; now confirmed by the manufacturer).

Have another question?Talk to an engineer
Next step

Kivi-Pekka 6

We will prepare an offer matched to the equipment and the needs of your farm.

Enquiry about Kivi-Pekka 6