Kivi-Pekka 5
5 m stone collector — the long-time favourite of the range (Flex Drum as option)
5 m stone collector — the long-time favourite of the range (Flex Drum as option)
5 m stone collector — the long-time favourite of the range (Flex Drum as option)
The Kivi-Pekka 5 is the long-time favourite of the range — a 5 m working width stone collector for medium-sized farms. It separates stones 2.5–35 cm in diameter (and with the optional Flex Drum up to Ø 50 cm) thanks to three-stage soil separation. Capacity reaches 1000 kg/min, the hopper holds 3 m³, and hydraulic unloading works up to a height of 2.9 m. Moderate power requirements — from 80 hp — mean working with a mid-range tractor.
How Kivi-Pekka separates stones from soil
Kivi-Pekka harvesters rely on three-stage soil separation and the optional Flex Drum (standard on model 7).
Three-stage soil separation
The machine lifts the topsoil and separates stones from earth in three stages. (1) Stones pass onto a screen placed beneath the lifting drum; (2) they go into the hopper, while the sifted soil returns to the field; (3) the remaining soil is collected by a separate container behind the rear wall of the hopper and released at the moment of unloading. As a result, only stones end up in the hopper, and the valuable topsoil stays in the field.
Source: Kivi-Pekka Catalogue 2025 (English edition), p. 3 (“Soil collecting in three stages”)
Flex Drum — flexible drum for large stones
The lifting drum's drive runs along its frame, so the entire drum can move upwards. A hydraulic pressure accumulator allows the Flex Drum to “pass over” large stones instead of becoming blocked by them, while the suspension protects the screen and tines. The standard range of 2.5–35 cm extends to Ø 50 cm. The drum can also be raised from the cab to release a jammed stone, without leaving the tractor. The Flex Drum is available on models 5 and 6 (optional) and comes as standard on model 7.
Source: Kivi-Pekka Catalogue 2025 (English edition), p. 4 (“Flex Drum lifts heavy stones”, “Extra strong tines”)
Tank capacity and discharge height
A larger tank means fewer stops for emptying. Model 5 has 3 m³ and a capacity of up to 1000 kg/min; model 7 has 5 m³ and up to 1400 kg/min. On models 4–7, the hydraulic discharge reaches 2.9 m, so stones go directly into a trailer with sides up to 2700 mm or into a lorry, without being unloaded onto the ground first.
Source: Kivi-Pekka Catalogue 2025 (English edition), p. 3 (“Tipping height ... up to 2.9 meters”)
ISOBUS package — ultrasonic sensor and rotor protection
The ISOBUS version measures the working depth with an ultrasonic sensor and maintains it automatically. In the event of a jam, the machine relieves the rotors by itself and raises the Flex Drum, then returns to work once the blockage clears. At the headland, a single button is enough: the automation lifts the machine and stops distribution. The package is available only in versions with the Flex Drum.
Source: Kivi-Pekka Catalogue 2025 (English edition), p. 4 (“Automation package with ISOBUS”)
Glacial soils
Farms on glacial soils, where stones “come up” out of the ground after every winter and damage seed drills, combines and tyres. Model 3.3 is for narrow specialist crops and landscape management (tractor from 60 hp), model 4 is an economical entry point (from 70 hp), model 5 suits medium-sized areas (from 80 hp), and model 7 is for large areas and contract services (from 100 hp).
Kivi-Pekka 5 vs Kivi-Pekka 7
Two stone collectors from the same three-stage soil separation — they differ in working width, hopper capacity and standard drum equipment.
- Working width
- 5 m
- Stone diameter
- Ø 2.5–35 cm (Flex Drum option → Ø 50 cm)
- Capacity
- up to 1,000 kg/min
- Hopper capacity
- 3 m³
- Weight
- 5300 kg
- Drum teeth
- 28
- Minimum tractor power
- od 80 KM
- Hydraulic flow rate
- 20 l/min
- Working width
- 7 m
- Stone diameter
- Ø 3.5–50 cm (Flex Drum as standard)
- Capacity
- up to 1,400 kg/min
- Hopper capacity
- 5 m³
- Weight
- 6540 kg
- Drum teeth
- 33 (13×50 mm)
- Minimum tractor power
- od 100 KM
- Hydraulic flow rate
- 20 l/min
Source: Kivi-Pekka catalogue 2025 (English edition), p. 5 (TECHNICAL DATA)
Kivi-Pekka 5 — specyfikacja
Explore the whole Kivi-Pekka family
This model is part of the Kivi-Pekka manufacturer's range. The other machines address the next stages of the same technology.
Uprawa i siewKivi-Pekka 7
7 m stone collector with Flex Drum as standard — stones Ø 3.5–50 cm
View model
Uprawa i siewKivi-Pekka 6
6 m stone collector — for large areas and contract work
View modelUprawa i siewYou are currently viewingKivi-Pekka 5
5 m stone collector — the long-time favourite of the range (Flex Drum as option)
Aktualny model
Uprawa i siewKivi-Pekka 4
4 m stone collector — the economical “younger brother” of the family
View model
Uprawa i siewKivi-Pekka 3.3
3.3 m stone collector — the newest, manoeuvrable model in the family
View modelKivi-Pekka 5 on each side
Kadr 0101 / 03
Conversation with an engineer.
The most common questions we hear from farms before purchase.
We have collected the questions we most often hear from farms before purchase — and the answers from our engineers. Every answer is based on verified knowledge of the machine.
- manufacturer's materials
- dokumentacji technicznej
- questions asked by farms
Answers based on the experience of thousands of farms in Europe.
Yes, the ISOBUS automation package is available as an option in Flex Drum versions only. Without Flex Drum, ISOBUS is not available.
5 m; capacity up to 1000 kg/min. According to the EN 2025 brochure, it is the range’s “long-time favourite”, proven in demanding conditions.
From 80 hp, hydraulic flow 20 l/min, PTO, three-point linkage. Machine weight 5300 kg.
As standard Ø up to 35 cm. With the optional Flex Drum, up to Ø 50 cm; the drum has a hydraulic pressure accumulator and “rides over” large stones instead of getting blocked by them.
Kivi-Pekka 5
We will prepare an offer matched to the equipment and the needs of your farm.