Duport PTW 4-in-Line — multi-axle slurry tanker with in-field slurry application
Duport · Four-axle slurry tankers 12,000–16,000 l, FLEX variant with sliding axle

Duport PTW 4-in-Line (and FLEX)

Four-axle slurry tankers 12,000–16,000 l, FLEX variant with sliding axle

Configure the cart

Four-axle slurry tankers 12,000–16,000 l, FLEX variant with sliding axle

PTW 4-in-Line (and FLEX)

Four-axle slurry tankers 12,000–16,000 l, FLEX variant with sliding axle

The 4-in-Line is a four-axle Duport slurry tanker that combines large capacity with low ground pressure. It is available in 12, 14 and 16 m³ versions. The FLEX variant (PTW 16, 16,000 l) has a sliding axle that extends 60 cm to each side, and a pendulum, hydraulically suspended axle frame. The load is always distributed evenly across all four wheels, the risk of tipping is minimal, and the sward is subjected to the least possible load. The high wheels make the vehicle easier to pull, and the short axle makes the machine manoeuvrable. The axle design needs little maintenance and comes with automatic lubrication as standard.

Technical data

PTW 4-in-Line (and FLEX) — specyfikacja

4-in-Line PTW 12
Tank 12,000 l; kerb weight 7,200 kg
4-in-Line PTW 14
Tank 14,000 l; kerb weight 7,500 kg
4-in-Line PTW 16
Tank 16,000 l; kerb weight 7,800 kg
4-in-Line FLEX PTW 16
Tank 16,000 l; kerb weight 9,500 kg; pump 8,000 l/min
Pump capacity
4,000 / 6,000 / 8,000 l/min
Maximum tyre width and height
62 cm × 205 cm
Linkage
CAT 2/3 (3-point)
Maximum applicator weight
4 500 kg
FLEX — sliding axle
Extends 60 cm to each side; pendulum axle, hydraulically suspended; automatic lubrication as standard
FLEX — equipment
Leaning suction arm as standard (long reach, including to hard-to-reach tanks); optional proportional control and section shut-off
Other models from the manufacturer

Explore the whole Duport family

This model is part of the Duport manufacturer's range. The other machines address the next stages of the same technology.

Duport Liquiliser with a Dutch tractor on a polder: an applicator with injection wheels for sub-surface RSM injection using CULTAN technologyFertilising

Liquiliser

Applicator with injection wheels for sub-surface RSM injection using CULTAN technology

View model
Duport All Track — disc injector for sub-surface slurry application, working in the fieldFertilising

All Track

Disc injector for slurry — working width 4.40–15.00 m (All Track / Profi / Twin)

View model
Duport PTW 8500 — trailed 8,500 l stainless steel tank with LIQUILISER branding, coupled with the tractor and SW injection frame for sub-surface UAN application using CULTAN technologyFertilising

PTW 8500

Trailed working liquid tank for the Liquiliser system: 8,500 l, stainless steel

View model
Duport PTW Enkelas — single-axle tanker for slurry application in the fieldFertilising

PTW Enkelas

jednoosiowe pompotankowce 8 000–12 500 l

View model
Duport PTW Tandemtank — two-axle tanker on a tandem axleFertilising

PTW Tandemtank

dwuosiowe pompotankowce 14 000 i 16 000 l

View model
Duport PTW 4-in-Line — multi-axle slurry tanker with in-field slurry applicationFertilisingYou are currently viewing

PTW 4-in-Line (and FLEX)

Four-axle slurry tankers 12,000–16,000 l, FLEX variant with sliding axle

Aktualny model
Duport PTW Bigfoot — slurry tanker on wide-profile low-pressure tyresFertilising

PTW Bigfoot

Slurry tankers 16,000 and 18,000 l on tyres up to 2,150 mm — lowest ground pressure

View model
Related knowledge
Fertilising

Slurry application: methods and machines

Injection, trailing hose or splash plate? We compare the main slurry application methods and show when each one is best.

Read Regulations

Cross-compliance and machinery: what you need to know

EU regulations influence the choice of machinery. Check how the Nitrates Directive, the European Green Deal and conditionality apply to your machinery fleet.

Read
Before you decide

Conversation with an engineer.

The most common questions we hear from farms before purchase.

We have collected the questions we most often hear from farms before purchase — and the answers from our engineers. Every answer is based on verified knowledge of the machine.

Based on
  • manufacturer's materials
  • dokumentacji technicznej
  • questions asked by farms

Answers based on the experience of thousands of farms in Europe.

An engineer answers

A sliding axle (extends 60 cm to each side) and a pendulum, hydraulically suspended axle. The load is distributed evenly across all four wheels, the risk of tipping is minimal, and ground pressure and sward damage are at their lowest.

An engineer answers

12,000, 14,000 and 16,000 l in the 4-in-Line version; the FLEX variant is available as PTW 16 (16,000 l).

Have another question?Talk to an engineer
Configurator

Build your Pomptankwagen

The same questions as in Duport's factory configurator — in Polish and without logging in. The machine is determined by three questions in turn: chassis, version and capacity. Together with them, the drive and pump output change.

Machine

Allgemeine Eigenschaften
Running gear

The first of three choices that determine the machine. The chassis determines the available versions, capacities and pump drive.

Construction

The version determines the pump drive: Farmerline always gets an 8-speed gearbox and a 4000 l/min pump; stronger versions get the Duport gearbox.

Hopper capacity
ISOBUS
Technical inspection
1 / 9
Duport Pomptankwagen — slurry tanker with screw pump

Duport

Pomptankwagen 4-in-line · 4-in-line · 12 000 l

Quotation

Individual — on request

Your configuration

Duport Pomptankwagen 4-in-line · 4-in-line · 12 000 l

Running gear
4-in-line
Construction
4-in-line
Hopper capacity
12 000 l
Pump drive
8-speed gearbox, mechanically controlled
Pump capacity
4,000 l/min
ISOBUS
With ISOBUS
Technical inspection
No inspection
Hitch
Eye ø50
Brakes
Pneumatic two-line
Automatic grease lubrication of steering axle
With automatic lubrication
Top pressure (Topdruk)
No pressure
Tyre pressure control
No adjustment
Tyres
Ceat 620/80 R42
Suction arm
Lying arm
Split arm
Standard lying arm
Cutting filter
L10000 Turbo
Left side connection
With left side connection
Additional side connection via cutting filter
With additional connection
Return pumping through the suction arm
With return pumping
Control
KV10 sequence block with Smart570
Electric left/right distributor
With electric distributor
Rate control
Gearbox
Three-way tap
Side-mounted
Applicator lift
“GZ” three-point, CAT 2–3
Applicator hitch
Ball
Preparation for Section Control
With preparation
Terminal
L10i
Joystick
Joystick III
Hose holder
Left holder
Camera on the applicator
With camera
Comfort package
With comfort package
Additional work lights
No additional lights
Marker lights
With marker lights

How many and what type of hydraulic outlets your tractor will require (double-acting with unpressurised return, single-acting, LS) — we calculate this with the offer: it depends on the selected control, pump and equipment.

The quotation is always individual — it depends on the version, equipment and delivery time. Ask us, and we will prepare an offer and check funding options.

Next step

PTW 4-in-Line (and FLEX)

We will prepare an offer matched to the equipment and the needs of your farm.

Let's put together a configuration

Enquiry about Duport PTW 4-in-Line (and FLEX)

Prefer the full form? Duport — extended enquiry