Tume Agri Orion
Universal combination grain and fertiliser seed drill — 3 and 4 m, coulter downforce 20–125 kg
Universal combination grain and fertiliser seed drill — 3 and 4 m, coulter downforce 20–125 kg
Universal combination grain and fertiliser seed drill — 3 and 4 m, coulter downforce 20–125 kg
The Tume Orion is a universal combination grain and fertiliser seed drill with working widths of 3 and 4 m. Coulter geometry keeps the sowing depth constant — resistance increases with depth — and downforce adjustable in the range of 20–125 kg per coulter allows sowing into stubble on soft soils as well. Its simple, light construction means lower power requirements than heavier units. It is aimed at lighter cultivation, without the electric metering known from the Super Nova Combi.
Three Tume seed drills — three different soils
Tume specialises in sowing depth accuracy; three models match three field conditions.
Constant sowing depth
The hallmark of Tume is maintaining a constant sowing depth despite field unevenness and a changing hopper fill level, thanks to the geometry of the coulter, the gauge wheel ahead of the coulter and the adjustable down pressure.
Source: Katalog Tume 2024
Coulter down pressure to suit soil condition
The Super Nova Combi works with a down pressure of 40–200 kg and is suitable for direct, reduced and conventional drilling. The Orion (20–125 kg) is the lighter segment, for cultivated and lightly reduced soils, and on light soils drills into stubble. The JC (JyräCombi) works on conventionally cultivated soil.
Metering: electric vs mechanical
The Super Nova Combi meters with four electric motors (2 for fertiliser, 2 for seed), with stepless adjustment during operation. The Orion and JC have mechanical metering. These are different levels of automation for different budgets and tasks.
Why the JC combines drilling and rolling
The JyräCombi (JC) performs drilling and rolling in a single pass. A patented mechanism with a balancing cylinder maintains even shaft pressure across the full width regardless of the hopper fill level, which is key to even emergence on cultivated soil.
Tume: Super Nova Combi vs Orion vs JC
Three Tume seed drills for different tasks: from direct drilling (Super Nova Combi), through lighter tillage (Orion), to drilling with rolling on cultivated soil (JyräCombi).
- Working width
- 3 / 4 m
- Hopper capacity
- 4 000 / 5 500 l
- Coulter pressure
- 40–200 kg
- Metering drive
- 4 silniki elektryczne
- Intended use
- Direct drilling, reduced tillage, conventional tillage
- Working width
- 3 / 4 m
- Hopper capacity
- fertiliser 2,475 / 3,430 l
- Coulter pressure
- 20–125 kg
- Metering drive
- mechanical (no electric metering)
- Intended use
- Cultivated and lightly reduced-tillage soils; drilling into stubble
- Working width
- 3 / 4 m
- Hopper capacity
- 3 720 / 4 160 l
- Coulter pressure
- even roller pressure (patented)
- Metering drive
- mechaniczne
- Intended use
- Cultivated soil; drilling + rolling
Source: Katalog Tume 2024
Orion — specyfikacja
Explore the whole Tume Agri family
This model is part of the Tume Agri manufacturer's range. The other machines address the next stages of the same technology.
Uprawa i siewSuper Nova Combi
ISOBUS combination seed and fertiliser drill — 3 and 4 m, coulter pressure up to 200 kg
View model
Uprawa i siewNova Combi
grain and fertiliser seed drill with disc coulters (300/400 cm)
View model
Uprawa i siewNova Combi Module
modular grain and fertiliser seed drill (NC Module 3000/4000)
View modelUprawa i siewYou are currently viewingOrion
Universal combination grain and fertiliser seed drill — 3 and 4 m, coulter downforce 20–125 kg
Aktualny model
Uprawa i siewJC 4000 Star
JyräCombi — sowing and rolling in one pass (3 and 4 m)
View model
Uprawa i siewCK
economical grain seed drill for grassland and organic farming
View model
Uprawa i siewKL
mounted grain and fertiliser seed drill (250/300 cm)
View model
Uprawa i siewHKL 2500 S
trailed grain and fertiliser seed drill with additional tank (250 cm)
View model
Uprawa i siewGreenmaster
surface seed drill for overseeding grassland (GM 1500/2500/3000)
View model
Uprawa i siewVirgo 700
700 cm soil roller for grassland and sensitive fields
View model
Uprawa i siewCultiPack
combination / disc harrow for pre-sowing tillage (300/400 cm)
View model
Uprawa i siewCultiPlus
multi-function combination with cultivator tines (300/400 cm)
View model
Uprawa i siewHarrow D
Harrow series disc harrow (350–550 cm, discs Ø 51 cm)
View model
Uprawa i siewHarrow R
rotary harrow (knife rollers) — R460L / R640L, mounted
View model
Uprawa i siewHarrow S660
tine harrow for shallow cultivation (660 cm, depth 0–4 cm)
View model
Uprawa i siewHarrow T
heavy tine cultivator with rear roller (T600 / T750)
View modelDirect drilling (no-till): how to start?
No-till is a system of cultivation without ploughing, saving fuel and time and protecting the soil. How to switch to direct drilling in Polish conditions.
Read RegulationsCross-compliance and machinery: what you need to know
EU regulations influence the choice of machinery. Check how the Nitrates Directive, the European Green Deal and conditionality apply to your machinery fleet.
ReadOrion on each side
Conversation with an engineer.
The most common questions we hear from farms before purchase.
We have collected the questions we most often hear from farms before purchase — and the answers from our engineers. Every answer is based on verified knowledge of the machine.
- manufacturer's materials
- dokumentacji technicznej
- questions asked by farms
Answers based on the experience of thousands of farms in Europe.
For cultivated and lightly reduced soils; with downforce of 20–125 kg also for sowing into stubble on soft soils.
Through coulter geometry — resistance increases with depth, which stabilises operation.
3 i 4 m.
The Orion is a lighter, simpler unit — without electric metering and with lower downforce (up to 125 kg instead of 200 kg).
Orion
We will prepare an offer matched to the equipment and the needs of your farm.